Valves and manifolds

Distributors for dividing into multiple streams, with several connection holes.

• Working pressure 700 bar, diameter DN 6.
• Supplied as standard in 3 (R3), 5 (R5) or 7 connection points (R7), other versions available on request.
• All connection circuits are equipped with a 3/8"-18NPT internal thread.

Throttle valve SV 3/8"

It is used to regulate the stroke of multiple cylinders connected to one pump. It is integrated into the hydraulic circuit using internal threads 3/8” - 18NPT. It is included in each branch that ends with a cylinder.

Safety valve OV 3/8"

It is used to close the cylinder when the load needs to be fixed in a raised position for a longer period of time and increases the safety of working with the hydraulic unit.

To ensure maximum protection, this valve must be connected directly to the cylinder with a rigid connection, not via a hose.

• Includes shut-off valve, check valve and safety valve
• The safety valve protects the cylinder in case of overloading the cylinder in a fixed position.
• When the shut-off valve is closed, oil can only flow into the cylinder in one direction through the check valve. In this mode, the valve provides protection against loss of pressure in the hydraulic system. To lower the load, the shut-off valve must open.